In order to know the IMEI

To key *#06#. It will appear the IMEI in screen. Also one is in the label that is in the back part, when we cleared the battery. In order to make disappear the IMEI of the screen to press any key.

Ways of transmission and saving of batteries

 3 transmission methods of voice: the normal method, HFR (Half Full Rate) and EFR (Enhaced Full Rate). The HFR and the EFR can be activated and be deactivated with codes. Evidently, with these tricks we will only save battery when we are in conversation, since in delay the telephone continues spending the same. After introducing these codes the telephone is reinitiated automatically, and we must return to introduce the PIN:

It activates EFR (Enhaced Full Rate) - to key *3370#, which makes east code is that the telephone emits with one more a more constant signal, since normally telephones GSM only emit towards the antenna when this one detects that it is spoken, for that reason sometimes, it seems as if we lost.  Recommendable to activate when we are in places with little cover.

To deactivate EFR (Enhaced Full Rate) - to key #3370#, if we deactivated the EFR, the quality of sound falls, but the hard battery like a 5% more.

To activate HFR (Half Rate Mode) - to key *4720#, if we activated the HFR, the telephone emits the signal in more intermittent periods, and so the low quality of sound, and besides remarkable form, more than when activating or deactivating the EFR, reason why is only recommended for when we are very right of battery. He is not recommendable to activate when we are in places with little cover. It increases the duration of the battery until a 30%.

To deactivate HFR (Enhaced Full Rate) - to key #4720#, if we deactivated the HFR, the quality of sound increases, but the battery can last a 30% less

Information of services

To key *#92702689#, this one is a menu that is used in the technical services of NOKIA. In order to move us by the options, we used the same that stops to move us by the menus, the central key with two you shoot with an arrow. In order to leave this menu it is necessary to extinguish the telephone. The information that shows to us is the following one:

• N° of series, or IMEI, of the telephone. He is not modifiable.
• Date of manufacture (month and year). He is not modifiable.
• Date of purchase (month and year). If this option this in target, appears “mmyyâ€? and it offers the option to us to introduce it. Once introduced it is not possible to be erased nor to be modified (only through special cable of PC and some programs).
• Date of the last repair (month and year). He is not modifiable from the menu. If the telephone has not been repaired never he appears “0000â€?
• Transfer User Data? It is for transferring all the information and configuration of the telephone to another compatible model through infrared port.
• Life Timer the time that takes ignition.

NOKIA 61xx/81xx/71xx/8210

In order to know to the version of software and the date of this one:

To put *#0000#. The information that shows to us is the following one:

V x.xx - It is the version of the software that takes our telephone. There are several versions of software: “5,04�, “5,09�, “5,10�. Sometimes the software version can be updated through cable of connection to PC and the suitable programs, they can do or it in a technical service of NOKIA. 21-01-00 - It is the date of manufacture of the software of the telephone. NSE-8/9 - It is the internal code of model of NOKIA for 61xx, 71xx, 81xx and 8210

In order to see the menu and to change alpha tag of the telephone

*3001#12345#

to 6200-7500-8400-Star TAC-Slimlite-1-888 V60 V120 V300

Blockade of the keyboard: To press * and # simultaneously.

Unfreezing of the keyboard: To press * and # simultaneously.

Simlock: To introduce a SIM different from the one from the original operator. To ignite the terminal, to introduce the PIN, (it will request the Simlock code), to introduce it and to press OK.

In order to activate menus RBS (of engineering): It presses: [slows down] [slows down] [slows down] 1 1 3 [slows down] 1 [slows down] [ok] (it slows down means to maintain pressed the key * until “it slows down� appears). Or you have the menu, now muévete until the option “Eng Field Options� with the keys < or >, and actívalo.

In order to deactivate the menu: It presses: [slows down] [slows down] [slows down] 1 1 3 [slows down] 0 [slows down] [ok] Funciona in 6200 ' s, 8200 ' s, 1-888's, 7500 ' s, 8400 ' s and StarTacs with version of software subsequent to .27. The options that appear in the menu are:

Active cell: RxLev -55 Energy level received in dBm

NCC 0 National Color Code, is used to identify the channel

7 BCC Broadcast Color Code, just as the previous one

MSTxPwr 35 Maxima energy transmitted in 35dBm about 3.2W

C1 003 Controla the signal level if the S-value negative by more than 5 seconds entocnes the system will make a change of cell.

Time Adv xxx xxx is to number. If you multiply east number by 550 you will obtain the distance in meters of the next radio station

Contiguous cells:

Adj Cell 1

Chanel 0033 Number of channel used in the cell

RxLev -65 Energy received in dBm

BCCH Decode

RxLevAM -104 allowed minimum Reception we compared if it with RxLev -65 you can obtain the C1 value that is (in our case) 39 and is sent to the cell to measure the intensity of the signal again.

MTxPwr 35 maximum Level of accepted energy.

C1 003?

NCC 0 National Color Code

6 BCC Broadcast Color Code

Parameters of the system:

Combined Off?

AcsClas 0000 Permite certain priorities

MCC 505 Mobile Country Code, 505 for Australia, 240 for Sweden… (The one of Spain is the 214)

01 MNC Mobile Code Network, 01 for Mobilenet, 02 for Optus, 03 paraVodafone, 17 for Movistar, 13 and 14 for Airtel and Amena. MCC+MNC is often called Code Network

08720 LAC Location Code Area, show in which zone you are

CellID 00473 Number of cell identification

T3212 005 Time between perióicas updates of the network (I do not know if they are the hours between updates or what lack for the next one)

BS-PA-MFRM 4?

XZQTY 14,3?

V60i - V120 (Only for Personnel)

To write without delay #7764726# and to tighten key “SEND�.

Instead of to try to realize the call, cellular you pedira the “code of security�. If you have never changed it, the code of makes is “000000�.

Once entered the code, to go to “configuration NAM�.

Soon to select NAM1.

Soon to select Level 1.

Soon to lower with the cursor hazta " domestic Etiq " and to enter there the name that you wish to put. Once realized the change the telephone would be reinitiated to keep the configuration.

V60i - V60i- V120 (Name change in the screen)

To write without delay Menu 073887* + nam 1 + level 1. To lower until Domestic Label and in that place to enter what you want that appears in screen and you accept everything.

Delays seconds and are reinitiated with the change done.

V300

If they want to record something with the recorder of sounds and later to form it as ringtone deberan to do the following thing:

They enter text Messages - New. Soon Message Multimedia - To enter voice registry. In that place we recorded what we want as stamps.

Soon it is necessary to send the message to any telephone of the directory and when this to begin to send, extinguishes the cellular one quickly.

They ignite it again and they go to Text Messages - Mailbox of Exit. They abren the message and they elijen Options - To store. Ready. They already have it in sounds

• *#06# - > MuestraIMEI
• *#9999# - > Muestra the version of software.
• *#0837# - > Muestra the version of software (instructions).
• *#0001# - > Muestra series parameters.
• *#9125# - > Active the signal while it loads.
• *#9998*228# - > Been of the battery (capacity, voltage, temperature)
• *#9998*246# - > Been of the program
• *#9998*289# - > Change of the frequency of the alarm
• *#9998*324# - > Depurar screens
• *#9998*364# - > Watchdog
• *#9998*377# - > EEPROM Stack Error - Uses you shoot with an arrow of the sides to select the values. To cancel and ok.
• *#9998*427# - > Trace Watchdog
• *#9998*523# - > Cambiar the resistance of LCD Only in version G60RL01W
• *#9998*544# - > Detection of “Jigâ€?
• *#9998*636# - > Been of the memory
• *#9998*746# - > So large of the SIM file
• *#9998*778# - > Table on watch SIM
• *#9998*785# - > Errors RTK (Run Time Kernel) - if is correct, then “phnâ€? is reseteado, the information is placed in the error memory. *#9998*786# - > Run, Last UP, Last DOWN
• *#9998*837# - > Version soft.
• *#9998*842# - > vibrating Test For flash the light of the screen during 10 the second and vibrator will activate.
• *#9998*862# - > Vocoder Reg - Normal, Earphone or carkit dog sees selected
• *#9998*872# - > Diag
• *#9998*947# - > Reset Fatal On Error
• *#9998*999# - > Last/Chk
• *#9998*9266# - > Yann debug screen (=Debug Screens)
• *#9998*9999# - > Software version
• *0001*s*f*t# - > serial Changes parameters (s=? , f=0,1, t=0,1) (incomplete)
• *0002*? # - > not known
• *0003*? # - > not known
• SP-unlock SGH-600 and SGH 2100
• *2767*3855# - > Full EEPROM Reset (THIS CODE REMOVES SP-LOCK) But also changes IMEI to 447967-89-400044-0, To restore your old IMEI uses the IMEI program found on the software page.
• *2767*2878# - > Custom EEEPROM Reset

These cóigos have been proven in moving bodies with version FLD_2C6 G60SB03X of Samsung SGH-600

To visualize IMEI: We press MENU, 9 and 8.

To visualize software version: We press MENU, 9, 8, and key of the left twice (1 single time in the case of the S6).

To block keyboard: To select option 3 of the MENU (Blockade) and to accept the option of Blockade of keyboard. Or to maintain pulsation the key #.

Unfreezing of the keyboard: Just like to block it.

SIEMENS S6 POWER

To visualize IMEI: *#06#

To visualize software version: Without the SIM to press *#06# and the key of the menu of the left